Wheel Changing - Vauxhall 2012 Agila Owner's Manual

110 Vehicle care
10 minutes. Tyre pressure
3 129. When the correct pressure
is obtained, switch off the
compressor.
If the prescribed tyre pressure is
not obtained within 10 minutes,
remove the tyre repair kit. Move
the vehicle one tyre rotation.
Reattach the tyre repair kit and
continue the filling procedure for
10 minutes. If the prescribed tyre
pressure is still not obtained, the
tyre is too badly damaged. Seek
the assistance of a workshop.
Release excess tyre pressure
with the button over the pressure
indicator.
Do not run the compressor longer
than 10 minutes.
12. Detach the tyre repair kit. Screw
the filler hose to the free
connection on the sealant bottle.
This prevents sealant leakage.
Stow the tyre repair kit in the load
compartment.
13. Remove any excess sealant
using a cloth.
14. Take the label indicating
maximum permitted speed from
the sealant bottle and affix in the
driver's field of view.
15. Continue driving immediately so
that sealant is evenly distributed
in the tyre. After driving approx.
6 miles (but no more than
10 minutes), stop and check tyre
pressure. Screw compressor air
hose directly onto tyre valve and
compressor when doing this.
If the tyre pressure has fallen
below 1.3 bar, the vehicle must
not be used. Seek the assistance
of a workshop.
16. Stow tyre repair kit below the floor
carpet in the load compartment.
Notice
The driving characteristics of the
repaired tyre is severely affected,
therefore have this tyre replaced.
If unusual noise is heard or the
compressor becomes hot, turn
compressor off for at least 30
minutes.
Pay attention to storage information
and best before date on sealant
bottle. Its sealing capability is not
guaranteed after this time.
Replace the used sealant bottle.
Dispose of the bottle as prescribed
by applicable laws.

Wheel changing

Some vehicles are equipped with a
tyre repair kit instead of a spare wheel
3 108.