Radio; Am-Fm Radio - Vauxhall 2012 Agila Owner's Manual

70 Infotainment system
Sound settings
Press the 6 button to enter the sound
settings menu. When this button is
pressed repeatedly the settings
appear in the following order:
■ BAS - Bass
■ TRE - Treble
■ BAL - Balance
■ FAD - Fader
■ AVC - Auto volume control
To adjust the displayed sound setting,
press button h or g.
Press the 6 button to exit.
Auto Volume Control
The AVC function automatically
adjusts volume depending on vehicle
speed to compensate for road noise.
In the sound settings menu, three
levels can be selected or the function
can be switched off.

Radio

AM-FM radio

AM (Long Wave and Medium Wave)
and FM (Frequency Modulation)
wavebands can be selected. Manual
and automatic storing facilities are
available on each wavebands to store
stations that can be recalled using the
preset buttons 1-6.
Radio mode
Press the FM/AM button. Wavebands
appear in the following order when
the button is pressed repeatedly:
FM1, FM2, LW, MW1, MW2.
Automatic search
Press and hold the h or gbutton for
approx. 1 second. The next
receivable radio station on the
selected waveband will be found. If
AF has been switched on previously,
only RDS stations will be found.
Station memory
In each waveband, 6 stations can be
stored under preset station memory
locations 1-6.
Storing stations manually
Tune to the desired waveband and
station. Press and hold the preset
station button (1-6) where the
selected station is to be stored, for
approx. 2 seconds. Previously stored
stations are overwritten.
Storing stations automatically
Tune to the desired waveband. Press
and hold the AST button for approx.
2 seconds. 6 stations with strong
signals are automatically stored
under preset station memory
locations 1-6. Previously stored
stations are overwritten. If AF is on,
only RDS stations will be found.
If less than 6 stations with strong
signals can be received, the number
of preset stations may be less than 6.
If no stations with strong signals can
be received, previously stored
stations are reset.