5. Reinstall bulb holder into lamp
assembly, rotate bulb holder
clockwise and ensure it is secure.
6. Replace lamp covers using the
4 screws removed earlier.
Interior lights
Front reading lights
1. Using a suitable screwdriver, pry
lamp lens away from roof lining.
2. Remove bulb.
3. Insert new bulb.
4. Reinstall lamp lens in roof lining.
Rear reading lights
1. Using a suitable screwdriver, pry
lamp lens away from roof lining.
2. Remove bulb.
3. Insert new bulb.
4. Reinstall lamp lens in roof lining.
Vehicle care
Load compartment light
1. Using a suitable screwdriver,
remove lens from lamp assembly.
2. Remove bulb.
3. Insert new bulb.
4. Reinstall lens to lamp assembly.
Glovebox light
Have bulbs replaced by a workshop.
Instrument panel
illumination
Have bulbs replaced by a workshop.
163