Number Plate Light; Side Turn Signal Lights - Vauxhall Antara Owner's Manual

162 Vehicle care
6. Replace lamp assembly by
guiding lugs on lamp assembly
into their corresponding
apertures.
7. Replace 2 screws removed earlier
and close the tailgate.

Side turn signal lights

1. Using a suitable screwdriver, pry
lamp assembly away from wing.
2. Rotate bulb holder anticlockwise.
3. Remove bulb from lamp assembly
by pulling bulb straight out of bulb
holder.
4. Insert new bulb into bulb holder by
pressing it in and rotating the bulb
holder clockwise.
5. Push lamp assembly back into
aperture.
Centre high-mounted
brake light
Have bulbs replaced by a workshop.

Number plate light

1. Remove 4 screws (arrowed) and
remove lamp covers.
2. Remove bulb holder from lamp
assembly by rotating it
anticlockwise.
3. Pull bulb straight out of bulb
holder.
4. Insert new bulb.