3. Remove bulb from bulb holder by
pulling it straight out.
4. Insert new bulb, using a lint-free
cloth to hold bulb.
5. Reinstall bulb holder in lamp
assembly by rotating it clockwise.
6. Reinstall headlamp assembly.
Fog lights
1. Remove 2 screws from panel on
underside of vehicle below front
fog lights and remove panel.
2. Disconnect harness connector
from bulb holder and rotate bulb
holder anticlockwise.
3. Remove bulb holder from lamp
assembly, rotate bulb
anticlockwise and remove from
bulb holder.
4. Insert new bulb into bulb holder
and rotate it clockwise.
5. Reinstall bulb holder in lamp
assembly and reconnect harness
connector.
6. Reinstall panel to underside of
vehicle using 2 screws removed
earlier.
Vehicle care
Tail lights
Rear brake, tail, turn signal,
reverse and fog tail light
1. Open the tailgate and remove
2 screws and lamp assembly.
2. Remove bulb holder by rotating it
anticlockwise.
3. Remove bulb from bulb holder by
pressing the bulb in and rotating it
anticlockwise.
4. Insert new bulb into bulb holder.
5. Reinstall bulb holder into lamp
assembly. Rotate bulb holder
clockwise and ensure it is secure.
161