Valcom V-2920 User Manual page 7

Contact
Lamp Contact
Ring Contact
Zone 26 Contact
Zone 27 Contact
Zone 28 Contact
Zone 29 Contact
SWITCH #
1 Normal queue sequence on zone 26.
2 Normal queue sequence on zone 27.
3 Normal queue sequence on zone 28.
4 Normal queue sequence on zone 29.
5 Queue signal output to telephone and
6
7
8
TABLE 1: AUXILIARY CONTACT OPERATION
Follows ringing cycle 2 seconds "ON", 4 seconds "OFF".
Operates when zone 26 is dialed and the "*" key is pressed.
Operates when zone 27 is dialed and the "*" key is pressed.
Operates when zone 28 is dialed and the "*" key is pressed.
Operates when zone 29 is dialed and the "*" key is pressed.
TABLE 2: DIPSWITCH FUNCTIONS
"OFF" POSITION
speaker.
Repeated alert tone.
Alert tone/Ringback tone.
Dial tone.
Operation
Operates on loop closure.
Bump zone 26 to end of queue.
Bump zone 27 to end of queue.
Bump zone 28 to end of queue.
Bump zone 29 to end of queue.
No queue signal output.
No repeated alert tone.
No alert tone/Ringback tone.
7
"ON" POSITION
No dial tone.
947305