Vauxhall VECTRA Owner's Manual page 265

260 Self-help, vehicle care
4. Und o the three screws using a
screwdriver and deta ch the bulb
mounting.
5. Remove bulb from socket. Bulb s in b ulb
holder:
1 = Brake/tail lig ht
2 = Turn signal light
6. Fit a new bulb without touching the
glass. R efit the b ulb mounting a nd screw
it into plac e. Position the bulb housing in
the v ehicle b od y and screw it into place.
C lose the compa rtm ent in the side trim.
Tailgate lights
Due to the large am ount of effort required,
bulbs should b e replaced by a workshop.
1. Use a screw driver to p rise off the plastic
plugs in the tailgate panelling to the
right and left of the tailgate lock .