4.5
Mounting the appliance
240
75
75
50
50
85
1
3
Fig. 4.4 Mounting the appliance
• Fix the hanging bracket (1) to the wall using the plugs
and screws (2) provided with the appliance.
• Hang the top of the appliance (3) onto the hanging
bracket using the suspension bracket.
4.6
Removing the front case
Fig. 4.5 Removing the front case
To disassemble the front housing of the appliance, pro-
ceed as follows:
• Release the screw (1) on the bottom of the appliance.
• Push both the clamps (2) on the bottom of the appli-
ance together so that the front cladding releases.
• Pull the housing forwards at the lower edge and re-
move the front cladding upwards.
ecoTEC exclusive installation and maintenance instructions / 0020017768_02
2
23
2
1
5
Installation
Danger!
d
The Vaillant ecoTEC exclusive may only be in-
stalled by a suitably qualified heating engineer
who also assumes the responsibility for install-
ing the appliance properly and fully commis-
sioning the appliance prior to first use, along
with demonstrating its correct use to the end
user.
5.1
General instructions for heating system
a
Caution!
Flush the heating system thoroughly before
connecting the appliance!
By doing that, residue such as welds, cinder,
hemp, putty, rust, rough dust and similar sub-
stances are removed from the pipes. Otherwise
such substances can be deposited in the appli-
ance and cause damage.
Assembly 4
Installation 5
11