Measurement Operation; Part 1 Multimeter Basic Testing; Ac And Dc Voltage Testing - UNI-T UT105 Operating Manual

Measurement Operation(1)

Part 1 Multimeter Basic Testing

A.AC or DC Voltage Testing (see figure 3)
Warning
To avoid harms to you or damages to the Meter from
electric shock, please do not attempt to measure
voltages higher than 1000Vp although readings may
be obtained.
The DC voltage ranges are: 200.0mV, 2.000V, 20.00V,
200.0V and 1000V.
The AC voltage ranges are: 2.000V, 20.00V, 200.0V and
750V
To measure DC or AC voltage, connect the Meter as
follows:
1. Insert the red test lead into the V terminal and the
black test lead into the COM terminal.
2. Set the rotary switch to an appropriate measurement
position in V
3. Connect the test leads across with the object being
measured.
The measured value shows on the display.
Model UT105: OPERATING MANUAL
(figure 3)
. or V
17