Model UT201/202: OPERATING MANUAL
Measurement Operation(2)
l When DC voltage measurement has been completed,
disconnect the connection between the testing leads
and the circuit under test and remove testing leads
from the input terminals.
B. AC Voltage Measurement
Warning
To avoid harms to you or damages to the Meter from
eletric shock, do not attempt to measure voltages
higher than 600V AC/DC, although readings may be
obtained.
The AC Voltage ranges are:
2.000V, 20.00V, 200.0V and 600V.
To measure AC voltage, connect the Meter as follows:
1. Insert the red test lead into the
and the black test lead into the COM terminal.
2. Set the rotary switch to V
3. Connect the test leads across with the object being
measured.
The measured value shows on the display.
(see figure 4)
red
( figure 4)
16
black
V terminal