Measuring Resistance - UNI-T UT50D Operating Manual

Measurement Operation(7)
The resistance ranges are:200 ,2k ,200k ,2M ,and
20M .
To measure resistance, connect the Meter as follows:
1. Insert the red test lead into the V
the black test lead into the COM terminal.
2. Set the rotary switch to an appropriate measurement
position in range.
3. Connect the test leads across with the object being
measured.
The measured value shows on the display.
l The test leads can add 0.1 to0.3 of error when
measuring low resistance, that is the range of 200 .
To obtain precision readings in low-resistance, use
the following equation:
Model UT50D: OPERATING MANUAL
( figure 5)
19
terminal and