Table of Contents
Advertisement
Button
Operation Performed
HOLD
Turn the rotary switch or press SELECT button can also exit
Hold mode.
Press HOLD button for 2 seconds when turning on the Meter to
display full icon.
When the Meter is at V
Hz
measure frequency. But the frequency readings obtained from
these ranges are only for reference,
Press ZERO to display the present value as stored value and
ZERO
display zero. After that, all the measurement result displayed
will automatically subtract the stored value.
Press ZERO again to display the stored value.
Press and hold ZERO to exit and back to normal operation.
Model UT209: OPERATING MANUAL
, press the button to
, A
and A
12
Advertisement
Table of Contents
