UNI-T UT58E Operating Manual page 22

Model UT58E: OPERATING MANUAL
Measurement Operation(9)
Warning
To avoid harm to you or damages to the Meter, never
attempt to measure voltages higher than 60V in DC
or 30V rms in AC although readings may be obtained.
During testing, the operating temperature must be
within 18-23
not be correct especially measuring low temperature.
The temperature measurement range is from -40
To measure temperature, connect the Meter as follows:
1. Insert the "+" and "-" temperature probe into
corresponding V
2. Set the rotary switch to
3. Place the temperature probe's tip to the object being
measured.
The measured value shows on the display.
Note
l When there is no temperature probe insert inside the
Meter, the LCD displays the Meter inside temperature
l The included temperature probe can only be measured
up to 250
the rod type temperature probe must be used instead.
When temperature measeuremnet has been completed,
remove the temperature probe away from the input
terminal of the Meter.
o
C, otherwise the obtained reading may
and COM terminal.
o
C .
o
C.. For any measurement higher than that,
22
o o
C~1000 C.