Power Management Setup - TYAN Triumph i845GV S6601 User Manual

3.5 Power Management Setup

ACPI Suspend Type:
This item selects the type of Suspend mode.
[S1 (PowerOn-Suspend)]: Enables the Power On Suspend function.
[S3 (Suspend-To-RAM)]: Enables the Suspend to RAM function.
Resume by OnChip USB:
When set to [Enabled], this item allows you to use a USB device to wake up a
system that is in the S3 (STR - Suspend To RAM) state. This item can be
configured only if the item "ACPI Suspend Type" is set to [S3(STR)].
Power Button Function
This item selects the method of powering off your system:
[Delay 4 Sec.]: Pushing the power button for more than 4 seconds will power
off the system. This will prevent the system from powering off in case you
accidentally hit or pushed the power button.
[Instant-Off]: Pressing and then releasing the power button at once will
immediately power off the system.
Wake-Up by PME# of PCI:
When set to [Enabled], access to the onboard LAN or a PCI card such as a
modem or LAN card will cause the system to wake up. The PCI card must
support the wake up function.
40
http://www.TYAN.com