TYAN Triumph i845GV S6601 User Manual page 32

Hard Disk Boot Priority
This item selects the hard disks booting priority. By pressing <Enter> key, you
can enter its submenu where the hard disks detected can be selected for the
booting sequence to boot up system.
This item functions only when there is the option of [Hard Disk] in any one of the
First/Second/Third Boot Device items.
First Boot Device / Second Boot Device / Third Boot Device / Boot Other
Device
Select the drive to boot first, second and third in the [First Boot Device],
[Second Boot Device], and [Third Boot Device] fields respectively. The BIOS will
boot the operating system according to the sequence of the drive selected. Set
[Boot Other Device] to [Enabled] if you wish to boot from another device other
than these three items.
Boot Up NumLock Status
This item determines the default state of the numeric keypad at system booting
up.
[On]: The numeric keypad functions as number keys.
[Off]: The numeric keypad functions as arrow keys.
Security Option
This item determines when the system will prompt for password - every time the
system boots or only when enters the BIOS setup.
[Setup]: The password is required only when accessing the BIOS Setup.
[System]: The password is required each time the computer boots up.
NOTE: Don't forget your password. If you forget the password, you will have
to open the computer case and clear all information in the CMOS before you
can start up the system. But by doing this, you will have to reset all previously
set options.
Intel OnScreen Branding:
This item determines whether to display the "Intel Inside" logo or not at system
boots up.
32
http://www.TYAN.com