TYAN Trinity 100AT S1590 User Manual page 19

Figure 12
mounts in the front of your computer
case. Consult with your case manufac-
turer for other cooling options.
Locate the cooling fan connector (e.g. CPU
Fan, J4) on the motherboard. Plug the CPU's
cooling fan cable into the cooling fan con-
nector on the board. There will be a plastic
clip assembly similar to that of the ATX
power connector that will force you to con-
nect the fan cable correctly (see Figure 13).
You are done.
Other than checking the jumper settings and cable connections and putting
the case back on, you are done. Installing a new motherboard may sound
difficult, but by following these directions, you should have a fairly uneventful
time installing our products. If you do encounter problems, your dealer will be
able to help you, or you can consult one of our many technical support
resources (see page 7).
S1590 Trinity 100AT
vendor or manufacturer for proper
voltage selection.
Push down lightly on the CPU, and
lower the arm on the ZIF socket to
secure the CPU. A squeaking noise is
normal as the arm lowers. After the
CPU is securely seated, install the
appropriate cooling device (Figure 13).
Tyan strongly recomends a heatsink/
fan combination on the Intel proces-
sors. For Cyrix Processors, use the
Cyrix supplied heatsink/fan combina-
tion with a second external fan which
19
Figure 13