Pnp/Pci Configuration - TYAN Tiger 230T S2507T User Manual

3.7 PnP/PCI Configuration

This section describes the PCI/PnP configuration options available.
PNP OS Installed
Reset Configuration Data
Resources Controlled By
(ESCD)
IRQ Resources
DMA Resources
PCI/VGA Palette Snoop
Assign IRQ for VGA
Assign IRQ for USB
40
Sets whether the system is using a Plug-n-Play OS. [Default set-
ting is NO]
Sets whether the configuration data in the ESCD should be
reset at bootup. [Default setting is Disabled]
Sets how the PnP devices will be controlled. [Default is
Auto(ESCD)]
Sets IRQs PnP control statuses.
Sets DMAs PnP control statuses.
Reserved. [Default setting is Disabled]
Sets whether an IRQ should be reserved for VGA. [Default set-
ting is Enabled]
Sets whether an IRQ should be reserved for USB. [Default set-
ting is Enabled]
http://www.tyan.com