(continued from previous page)
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up Numlock Status
Gate A20 Option
Typematic Rate Setting
Typematic Rate
Typematic Delay
Security Option
PS/2 Mouse Function Control
MPS Version Control for OS
OS Select for DRAM > 64MB
HDD S.M.A.R.T. Mode
Report no FDD
Video BIOS Shadow
C800-CBFFF Shadow to
DC000-DFFFF Shadow
EPA Logo Select
Report no FDD
34
If you have two drives and need to swap them for some reason,
use this option. [Default setting is Disabled]
Sets whether the BIOS should check all floppy drives during
boot-up. [Default setting is Enabled]
Sets whether the Num Lock key should be enabled during boot-
up. [Default is Enabled]
Refers to the method that the system addresses memory above
1MB. [Default is Normal]
Sets whether the keyboard input speed should be altered.
[Default is Disabled]
If above setting is Enabled, this sets the characters per second
of keyboard input. [Default is 6]
If above setting is Enabled, this sets the delay on character input
from keyboard. [Default is 250]
Sets whether the password should be enabled. [Default is
Setup]
Reserved. [Default is Enabled]
Reserved. [Default is 1.1]
If your OS requires this setting, it can be altered from here.
[Default is Non-OS2]
Allows the S.M.A.R.T. protocol to report server system informa-
tion over a network. [Default is Auto]
Allows the BIOS to report to Win95 that no FDD exists (if this is
the case). [Default is No]
Reserved. [Default is Enabled]
Reserved. [Default is Enabled]
Provides the options for the EPA logo. [Default is LOGO-0]
Provides the option to show the smaller EPA logo. [Default is
Off]
http://www.tyan.com