Main Setup - TYAN Tiger MPX S2466 User Manual

3.1 – Main BIOS Setup
In this screen, you can alter general features such as the date and time, as well as access the IDE
configuration screens. Note that the options listed below are for options that can directly be
changed within the Main Setup screen.
System Time
System Date
Legacy Diskette A (...B)
Primary Master/Slave
Secondary Master/Slave
System/Extended
Memory
Large Disk Access
Mode
Boot Summary Screen
Master/Slave Setup
All the options in this section are automatically detected by the motherboard chipset and BIOS.
You do not need to configure this section.
3.2 – Advanced Setup
Options such as I/O device interfaces can be altered through this screen.
Reset Configuration
Data
USB Host Controller
USB BIOS Legacy
Support
Chipset Configuration
Keyboard Configuration
I/O Device Configuration
Onboard PCI IDE
Serial Port A (..B)
HH = Hours The system clock operates in 24-hour format.
MM = Minutes
SS = Seconds
MM/DD/YYYY
360KB, 5 ¼" Defines the floppy drive type.
1.2MB, 5 ¼"
720KB, 3 ½"
1.44MB, 3 ½"
2.88MB, 3 ½"
Disabled
Press [Enter]
Press [Enter]
Displays the total memory the system contains.
Large This option denotes that a hard drive with more
DOS than 1024 cylinders, more than 16 heads and or
Other more than 64 tracks per sector is present.
Choose Other when using OSes such as UNIX.
Disabled Toggles the information screen on boot-up of
Enabled the system.
Yes Erases all configuration data in a section of
No memory
Configuration
configuration
devices.
Enabled Toggles the onboard USB controller. This option
Disabled needs to be enabled if you plan to use USB
devices.
Enabled Toggles support for USB devices in DOS.
Disabled
Press [Enter]
Press [Enter]
Press [Enter]
Both Toggles the onboard IDE controller using either
Disabled one or both of its two channels.
Primary
Secondary
Enabled Toggles the use of the onboard Serial Ports.
Disabled Enabling the ports will require system resources
Auto such as IRQs.
22
http://www.tyan.com
for ESCD (Extended
Data) which
settings for non-PnP
System
stores the
plug-in