TYAN M3289 User Manual page 18

Step 3:
Connect 2x5 ribbon cable between Tyan motherboard COM2 connector and Tyan
SMDC J46 or J47. (Check with www.tyan.com SMDC FAQ for J46/J47 connector)
Make sure that the key on the ribbon cable aligns with the key on the connector, and
that the red line on the ribbon aligns with pin 1 of the connector.
Step 4:
Locate the onboard "SMDC-Link" Network Interface Controller (NIC) on Tyan
motherboard. (Check with www.tyan.com SMDC FAQ for SMDC-Link NIC location)
18
http://www.tyan.com