Buick Regal User Manual page 82

4. Select the phone to delete and
follow the screen prompts.
To connect to a different phone, the
new phone must be in the vehicle
and available to be connected to the
Bluetooth system before the
process is started.
1. Press the CONFIG button.
2. Select Phone Settings.
3. Select Device List.
4. Select the new phone to connect
to and follow the screen
prompts.
A Bluetooth-enabled cell phone
must be paired and then connected
to the vehicle before it can be used.
See the cell phone manufacturer's
user guide for Bluetooth functions
before pairing the cell phone. If a
Bluetooth phone is not connected,
calls will be made using OnStar
Hands-Free Calling, if available.
See OnStar in the owner manual
for more information.
1. Press / . The system
responds Please Say a
Command, followed by a tone.
2. Say Pair. The system responds
with Please search for
Bluetooth devices on your
phone. Confirm or enter
number.
3. Start the pairing process on the
phone to be paired.
4. Locate and select the device
named after the vehicle make
and model in the list on the cell
phone. Follow the instructions
on the cell phone to enter the
PIN provided in Step 3 or to
confirm the six-digit code
matches. The system responds
successfully paired.
5. Repeat Steps 1 4 to pair
additional phones.
The system can list all cell phones
paired to it. If a paired cell phone is
also connected to the vehicle, the
system responds with is connected
after that phone name.
1. Press / . The system
responds Please Say a
Command, followed by a tone.
2. Say Device List.
If the phone name to delete is
unknown, see Listing All Paired
and Connected Phones.
1. Press / . The system
responds Please Say a
Command, followed by a tone.
2. Say Delete Device.
3. The system responds with: To
delete a device, please touch its
name on the screen. Select the
device to delete on the display
and it will be removed.