Bluetooth Audio - Buick Regal User Manual

Connect a 3.5 mm (1/8 in) cable
from the auxiliary device to the
auxiliary input jack. When a
device is connected, the system
automatically begins playing audio
from the device over the vehicle
speakers.
If an auxiliary device has already
been connected, but a different
source is currently active, do one of
the following:
Press SOURCE to scroll all of
the available audio source
screens, until the AUX source
screen is selected.
Say Play Front AUX using
voice recognition to play the
auxiliary device . See
If equipped, music may be played
from a paired Bluetooth device. See
Pairing a Phone/Device under
.
To play music through a Bluetooth
device:
1. Power on the device, pair, and
connect the device.
2. Music can be launched by doing
one of the following:
Press the Bluetooth Audio
screen button on the
Home Page.
Press SOURCE until
Bluetooth Audio is selected.
Press the SRC button on
the steering wheel controls
until Bluetooth Audio is
selected. See
Use voice recognition. See
.
The music can be controlled by
either the infotainment controls or
the controls on the device.
.
.
When a phone is connected to the
system through Bluetooth Audio
the phone notifications and sounds
may not be heard on the phone
until Bluetooth is disconnected.
Notification features may vary based
on the phone. Check the phone
manufacturer s information for
notification support.
Press the Menu screen button and
the following may display:
Press the Menu knob to
turn shuffle on or off. Not all devices
support the shuffle feature.
When selecting Bluetooth audio, the
Bluetooth device internal music
player may not open depending
on the status of the device. All
devices launch and play back audio
differently. Make sure the correct
audio source is playing on the
device for Bluetooth audio playback
on the radio. When the vehicle is
not moving, use the device to begin
playback.