Buick Regal User Manual page 77

To activate the navigation voice
recognition:
1. Press / on the steering
wheel. The audio system mutes.
A voice prompt says, Please
say a command. Wait until the
tone is heard before speaking.
If there is no tone, make sure
the volume is turned up.
While voice recognition is active,
the system displays a symbol in
the top right of the screen.
2. Clearly speak the command
Navigation.
3. Clearly speak one of the
commands in this section.
The following commands only apply
once the Navigation command is
given.
Changes the
country origin to input a destination
from that region. The system will
accept United States, Canada,
or Mexico.
an address to be stated as a
one-shot method. The system will
recognize the address if stated
all at once or say a city center.
An example is to say, 200
Renaissance Street, Detroit,
Michigan or Detroit, Michigan.
Allows an
address to be stated one step at a
time. The format will be State, City,
Street, then House Number.
Allows an
Intersection to be stated as the
destination. The format will be
State, City, Street, then Junction.
Instructs the system to start
guidance to address saved as
My Home.
to the system, which contains
Address Information stored for
contacts, the address associated
with that contact can become a
route. If the system cannot resolve
Allows
the address, an error displays.
a Point of Interest to be stated
as a destination. Become familiar
with the POI categories and
sub-categories in the system by
pressing Destination from the Home
Page or DEST from the faceplate,
then selecting Point of Interest. POI
commands for Along Route and
Around Destination will be available
if route guidance is active.
of individual waypoints or the
destination. The system will ask
for the choice of entry method to
continue. An example is to say, POI
Along Route or Intersection.
When a phone is paired
Allows
Allows addition