Buick Regal User Manual page 80

The system can be used while in
ON/RUN, ACC/ACCESSORY,
or Retained Accessory Power
(RAP). The range of the Bluetooth
system can be up to 9.1 m (30 ft).
The radio can connect to most
Bluetooth-enabled phones.
Available features and functions
may be dependent on the device.
Use the buttons on the infotainment
system and the steering wheel to
operate the Bluetooth system.
Press to
answer incoming calls and start
voice recognition.
end a call, decline an incoming call,
or cancel voice recognition.
Press + or
increase or decrease the volume.
For information about how to
navigate the menu system using the
infotainment controls, see
enter the Phone main menu. Press
and hold to mute or unmute.
The voice recognition system uses
commands to control the system
and dial phone numbers.
When using voice recognition:
The system may not recognize
voice commands if there is too
much background noise.
A tone sounds to indicate that
Press to
the system is ready for a voice
command. Wait for the tone and
then speak.
to
Speak clearly in a calm and
natural voice.
See
.
Press to
Sound comes through the vehicle's
front audio system speakers and
overrides the audio system. Use the
VOL/ or /
call to change the volume level. The
adjusted volume level remains in
memory for later calls. The system
maintains a minimum volume level.
See
See
A Bluetooth-enabled cell phone
must be paired and then connected
to the vehicle before it can be used.
See your cell phone manufacturer's
user guide for Bluetooth functions
before pairing the cell phone. If a
Bluetooth phone is not connected,
calls will be made using OnStar
Hands-Free Calling, if available.
.
See OnStar in the owner manual.
knob during a
.
.