Re-Dialing; Saving A Name Tag - Buick Encore Owner's Manual

7-26 Infotainment System
(For number input information, see
the dialogue example for Making a
Call Using a Telephone Number
earlier in this section.)
User: Send.

Re-dialing

The Re-dialing command re-dials
the last number dialed.

Saving a Name Tag

The Save command is used to
store a telephone number in the
telephone book as a name tag.
The name entered must be
repeated once. The pitch and
pronunciation must be as identical
as possible for both name inputs,
otherwise the voice control will
reject the inputs.
A maximum of 50 name tags can be
stored in the telephone book.
Name tags are speaker-dependent,
i.e., only the person who recorded a
name tag can open it. To avoid the
start of the recording of a saved
name from being cut off, a short
pause should be left after an input
request.
To be able to use the name tag
independently of the location, i.e.,
including other countries, all
telephone numbers should be
entered with a plus character and
a country code.
Available commands:
Save : the inputs are accepted.
Re-dialing : the last input is
repeated.
Help
Cancel
Example of a Dialogue
User: Save.
Voice output: Please say the
number to save.
User: Say number to save.
(For number input information, see
the dialogue example for Making a
Call Using a Telephone Number
earlier in this section.)
User: Save.
User: Name Tag (give name tag).
Voice output: Please repeat the
name tag to confirm.
User: Name Tag.
Voice output: Saving the
name tag.
Deleting a Name Tag
The Delete command is used to
delete a previously saved name tag.