Telephone Number Dialing; Selecting Phone From Device List; Example Of A Dialogue - Buick Encore Owner's Manual

7-24 Infotainment System
(At this time, start the pairing
process on the mobile phone that
will be paired to the vehicle. See the
mobile phone manufacturer's user
guide for information on this
process. Locate the device named
UHP followed by a four-digit number
in the list on the mobile phone.
Follow the instructions on the
mobile phone and enter the
four-digit code provided by the
system.)
Voice output: Do you want to pair
the device?
User: Yes.
Voice output: Paired, ending
session.

Selecting Phone from Device List

The Select device command can
be used to select a different paired
mobile phone. The UHP system
asks for a device number that was
assigned by the UHP system to the
mobile phone when it was paired.

Example of a Dialogue

User: Select device.
Voice output: Please say a device
number to select.
User: device number.
Voice output: Do you want to select
the device number device number.
(The device name appears on the
infotainment display screen.)
User: Yes.
Voice output: One moment please,
the system searches for the
selected device.
Voice output: Device number
device number is selected, ending
session.

Telephone Number Dialing

After the Dial command, the voice
control requests input of a number.
The telephone number must be
spoken in your normal speech
without any artificial pauses
between the numbers.
Recognition is best, if a pause of at
least half a second is made after
every three to five digits. The
infotainment system then repeats
the numbers recognized.
Available Commands:
Dial : the inputs are accepted.
Digit : a numeric value between
0 9 is entered.
Delete : the number last
entered or the block of numbers
last entered is deleted.
Plus : a preceding + is entered
for a call abroad.
Verify : the inputs are repeated
by the voice output.
Asterisk : an asterisk * is
entered.
Hash : a hash character # is
entered.
Pause : a pause is entered into
the character sequence.
Help
Cancel