Call Waiting
Call waiting must be supported on
the mobile phone and enabled by
the wireless service carrier to work.
To accept the incoming call, turn the
TUNE/MENU knob to Answer and
press TUNE/MENU, or press
/
on the steering wheel
controls.
To decline the incoming call, turn
the TUNE/MENU knob to Decline
and press TUNE/MENU, or press
/
on the steering wheel controls.
1. Press
.
2. Select Switch Call from
the menu.
Conference Calling
Conference calling and three-way
calling must be supported on the
mobile phone and enabled by the
wireless service carrier to work.
To start a conference call while in
a call:
1. Press TUNE/MENU and select
Enter Number.
2. Enter the character sequence
then select call.
or
3. After the call has been placed,
press TUNE/MENU and choose
Merge Calls.
4. To add more callers to the
conference call, repeat
Steps 1 3. The number of
callers that can be added is
limited by your wireless service
carrier.
To disconnect from one caller while
in a conference call, select Detach
Number from the menu and select
the number to hang up on.
Ending a Call
Press TUNE/MENU and select
Hang Up, or press
steering wheel controls.
Infotainment System
To Mute a Call
Press TUNE/MENU and select
Mute Call.
To Cancel Mute
Press TUNE/MENU and select
Mute Call.
Dual Tone Multi-Frequency (DTMF)
Tones
The UHP system can send numbers
during a call. This is used when
calling a menu driven phone
system.
To access this system:
1. Press TUNE/MENU and select
Enter Number.
2. Enter the character sequence.
/
on the
7-21