Brother HL Series User Manual page 18

Printing Methods
c
Using both hands, slide the manual feed paper guides to the width of the paper that you are going to use.
d
Using both hands, put one piece of paper in the manual feed slot until the front edge of the paper touches
the paper feed roller. When you feel the machine pull in the paper, let go.
Note
• Put the paper into the manual feed slot with the side to be printed face up.
• Make sure that the paper is straight and in the correct position on the manual feed slot. If it is not, the paper
may not be fed properly, resulting in a skewed printout or a paper jam.
• DO NOT put more than one piece of paper in the manual feed slot at any one time, as it may cause a jam.
• If you put any media in the manual feed slot before the machine is in Ready mode, the media may be
ejected without being printed on.
1
14