Cleaning The Paper Pick-Up Roller - Brother HL Series User Manual

Routine Maintenance
i
Open the front cover. Put the drum unit and toner cartridge assembly back into the machine.
j
Put the paper tray firmly back in the machine.
k
Close the front cover.
l
Plug the machine's power cord back into the AC power outlet first, and then reconnect all cables. Turn
on the machine's power switch.

Cleaning the paper pick-up roller

If the paper pick-up roller is dirty, the machine may not feed paper. In that case, clean the paper pick-up roller
as follows:
a
Turn off the machine's power switch. Disconnect all cables, and then unplug the power cord from the AC
power outlet.
b
Pull the paper tray out of the machine.
c
Remove all the paper, and anything that is stuck inside, from the paper tray.
4
4
94