Esc Ixf1; Retrieve Fnc1 Replacement Setting - Brother P-touch PT-9800PCN Template Manual

ESC iXF1

Retrieve FNC1 replacement setting

[ASCII] ESC i X F 1 n1 n2
[Decimal] 27 105 88 70 49 nd1 nd2
[Hexadecimal] 1B 69 58 46 31 nh1 nh2
[Parameters] nh1: 00h (fixed)
nh2: 00h (fixed)
[Description]
・Retrieves the FNC1 replacement setting.
・3-byte data is returned from the machine.
[1]: 01h (fixed)
[2]: 00h (fixed)
[3]: Setting
00h: FNC1 replacement setting OFF
01h: FNC1 replacement setting ON
・The retrieved value is a value specified by a static command.
[Example]
・When the FNC1 replacement setting is OFF:
If ESC i X F 1 00h 00h (1Bh 69h 58h 46h 31h 00h 00h) is sent to the machine, the following
is returned from the machine.
01h 00h 00h
73