Esc Ixr2; Specify Print Start Received Character Count - Brother P-touch PT-9800PCN Template Manual

ESC iXr2

Specify print start received character count

[ASCII] ESC i X r
[Decimal] 27 105 88 114 50 nd1 nd2 nd3 nd4
[Hexadecimal] 1B 69 58 72 32 nh1 nh2 nh3 nh4
[Parameters]
[Description]
・Specifies the number of characters to be received in order to start printing.
nh3+(nh4*256): Print start received character count (bytes) (1 to 999)
・The default print start received character count is 10.
・This command is a static command.
[Example]
・To change the print start received character count to 100 characters: Since nh3=64h and
nh4=00h, the command will be as follows.
ESC i X r 2 02h 00h 64h 00h
(1Bh 69h 58h 72h 32h 02h 00h 64h 00h)
2 n1 n2 n3 n4
nh1: 02h (fixed)
nh2: 00h (fixed)
00h≤nh3≤FFh
00h≤nh4≤03h
38