Setting And Activating Alarm 2 - Brookstone IDESIGN User Manual

6 . Activate Alarm 1 by pressing the ALARM 1 button on the top of the clock .
When the button is "up", the alarm is activated and the Alarm 1 time and
wake-to choice icon will appear on the display .

seTTInG anD acTIvaTInG alaRM 2

1 . Press and hold the ALARM 2 seT button for 2 seconds . The clock will
go into Alarm 2 set mode . Alarm 2 hour will flash .
2 . Use the VOLUMe/seT dial to choose the hour . Press the ALARM 2 seT
button to save the hour . The minutes will flash .
3 . Use the VOLUMe/seT dial to choose the minutes . Press the ALARM 2
seT button to save the minutes . The Alarm 2 time is saved . The Wake-to
choice icon will flash .
4 . Use the VOLUMe/seT dial to select your wake-to choice from iPod,
Radio or Buzzer .
5 . Press the ALARM 2 seT button to save all settings . if the ALARM 2 seT button
is not pressed while the hours, minutes or wake-to choice is flashing, the alarm
information will be saved and the clock will display after 5 seconds .
6 .
Activate Alarm 2 by pressing the ALARM 2 button on the top of the clock .
When the button is "up", the alarm is activated and the Alarm 2 time and
wake-to choice icon will appear on the display .
note: the alarm sound for both alarm 1 and alarm 2 incrementally
increases in volume, reaching its loudest setting in 30 seconds.
12