Table of Contents
Advertisement
oPeRaTIon
GETTING STARTED
1 . Connect one end of the supplied power adapter (DC 5V) to the scanner
and the other end to an electrical outlet (see example below) .
2 . Press
3 . To turn the power off, press and hold
INSERTING AN SD OR MMC MEMORY CARD
Note: Make sure to insert an SD or MMC card
prior to scanning. The scanned images will be
stored on the SD or MMC card.
1 . Insert an SD or MMC memory card into the
slot according to the orientation marked on
the scanner (see example at right) .
2 . To remove the memory card, simply pull
the card straight out of the unit .
9
Power
Power adaptor
Adapter
and the power turns on .
.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Instant Slide & Negative and is the answer not in the manual?