Scanning Cassette Titles With Scan; Listening To The Radio During Fast Tape Winding With Rm (Radio Monitor); Care Notes - Blaupunkt Malaga RCR 127 Operating Instructions Manual

Scanning cassette titles with
SCAN
You can have the cassette titles played brief-
ly by using the scan function. If you like a
title, stop the scan to continue listening to
that song.
To start/stop the scan function:
• Press the SCA button briefly.
Scan condition: There has to be an unre-
corded tape portion of at least 3 seconds
between the individual songs.
Listening to the radio during fast
tape winding with RM (Radio
Monitor)
When the tape is fast forwarded or rewound
(also with CPS), the radio will normally be
muted. In order to listen to the radio during
fast winding, you can activate the Radio
Monitor function.
For more information please refer to "DSC
programming - RM ON/OFF"

Care notes

To avoid possible problems, we recommend
you to use C-60/C-90 type cassette tapes
only. Store your tapes in a cool place away
from dirt, dust and temperatures exceeding
50 °Celsius. Allow very cold tapes to warm
up before playing them in order to avoid
uneven tape transport. After approximately
100 hours
of use, dust particles collected on the play-
back head or roller may lead to tape run
problems and sound distortions.
Use a head cleaning tape to remove nor-
mal dirt build-up. For tougher cases, use a
cotton swab (Q-Tip) dipped in alcohol. Do
not attempt to clean by inserting a hard ob-
ject into the player!
39