Assembly; Operations; Special Features; Before You Clean - Bissell CLEANVIEW QUICKWASH 90D3 SERIES User Manual

A
ssembly
1. Slide upper body into lower body.
2.
Secure with screws.
3.
Slide handle assembly down into upper body
until it will go no further. Align screw slots.
4.
Secure with screw.
5.
Place clean water/solution tank on back of unit.
0
perations

special features

Microban antibacterial protection
™
Microban antibacterial protection helps prevent
the growth of harmful common household
bacteria including E. coli, Salmonella and
Staph. a. It helps to keep the unit fresher and
cleaner between uses.
™
scotchgard
Carpet protection applied at the mill typically
wears down over time from heavy foot traffic
and everyday cleaning, including deep
cleaning. To help restore this important
protection, only BISSELL offers cleaning
formulas with Scotchgard protector. This offers
extra protection against dirt and tough stains
to keep your carpets looking good longer.

before you clean

1. Remove easily moved furniture (chairs,
lamps, coffee/cocktail tables, etc.) from
room if needed.
2. Vacuum carpet thoroughly.
3. Decide where to begin. Plan to leave
a path open to empty soiled water and
refill cleaner.
note: carpeting will dry in three
to four hours, depending on carpet
style and air circulation in room. a
floor fan speeds drying
w w w . b i s s e l l . c o m
protector
1.
3.
5.
2.
4.
Tip:
Always vacuum
thoroughly before
you deep clean.
If possible, move
large furniture to
an area you will
not be cleaning.
5