Using Your Microwave; Using Your Microwave Setting The Clock; Setting The Clock; Before First Use - Baumatic BMG200SS Instruction Manual

Using your microwave

Setting the clock

o When your appliance is connected to the power supply for the
first time, the LED display will flash.
o Press the Preset.Clock button (3) to enter the time setting
mode.
o Use the Time.Weight button (4) to set the current hours of the
day.
o Press the Preset.Clock button (3) again to confirm the hours
programmed.
o Then use the Time.Weight button (4) to set the current minutes
of the day.
o Press the Preset.Clock button (3) to confirm the minutes set or
wait for 5 seconds and the programmed numbers will go steady.
The time of day will now be set.

Before first use

o To remove any residue from the oven that may have been left
from the manufacturing process, you should place a cup that is
half filled with water in the microwave.
o Set the microwave on its highest power level for 2 minutes.
o The oven cavity and outside of the appliance should be cleaned
with warm soapy water, using either a sponge or soft cloth. No
abrasive cleaners should be used. The appliance should be
thoroughly dried afterwards.
o When the microwave is connected to the power supply, the LED
display will flash 3 times. It will then flash " : " to prompt you to
input a cooking function and time.
15