Page 2
User Manual for your Baumatic BMM204SS 20 Litre microwave oven NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference; for you or any person not familiar with the operation of the appliance.
Environmental note o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the environment.
IMPORTANT SAFETY INFORMATION Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this...
Page 6
If you notice that the door seal, door surfaces, power cord and plug are damaged. You s hould stop using the appliance, disconnect it from the mains supply and contact the Baumatic Customer Care Department. o Only genuine Baumatic spare parts should be fitted to your appliance.
Page 7
Warning and safety instructions o This appliance complies with all current European safety legislation. Baumatic do wish to emphasise that this complian does not remove the fact that the appliance surfaces will become hot during use and retain heat after operation.
Page 8
This appliance must be correctly in stalled by a uitably qualified person, strictly in accordance ith the manufacturer’s instructions. o Baumatic Ltd. declines any respon sibility for injury or damage, to person or property, as a result of improper use or installation of this appliance.
Page 9
Declaration of conformity o CE: Appliance conforming European directives 89/336/EEC, 93/68/EEC, 73/23/EEC and subsequent revisions and “RoHS” directive 2002/95/CE.* o The manufacturer declares that the oven is built using certified materials requires appliance installed accordance with the standards currently in force. This appliance must be used by a trained person for domestic purposes only.
pecifi cations Product dimensions Aperture dimensions (including frame kit) Height: 382 mm Height: 362 mm Width: 594 mm Width: 560-570 mm Depth: 330 mm Depth: 320 mm Product specifications 5 power levels 8 functions: Auto-rehea Vegetables Fish Meat Pasta Potato Pizza Soup o Quick start...
o Stainless steel exterior and cavity o Mark resistant coating o Capacity: 20 litres o Microwave out put: 800 W Electrical details Rated Voltage: 230 Vac 50 Hz Supply Connection: 13 A (do uble pole switched fused outlet with 3mm contact gap) ax Rated Inputs: 1.25 kW...
Description of the appliance Control panel Viewing window Turntable shaft Door Turntable ring assembly Safety interlock system Glass tray Control panel LED display Defrost by time button Quick Start/Star t button Microwave button Cancel/Stop bu tton Door button Adjustment dial Auto Menu Auto Menu button Clock/Pre-set time button...
If the glass tray or turntable ring assembly crack s or breaks, it must be replaced immediately. Genuine Baumatic parts can be obtained from the Baumatic Spares Department. LED display o The LED display will show the time of day, or if the microwave is in u se, it will show the cooking time.
ndicates that a low power level is selected. Indicates that the ti me of day is shown on the display. ndicates that the safety lock is engaged. ndicates that the auto menu function has been selected. ndicates that grams are shown on the LED display. ndicates that millilitres are shown on the LED display.
o The oven cavity and outside of the appliance should be cleaned with warm soapy water, usin g either a sponge or soft cloth. No abrasive cleaners should be used. The appliance should be thoroughly dried afterwards. Cooking food o Once the clock has been set, your microwave is then ready to use.
taken when removing items from the microwave. We would recommend that you use an oven glove. o After th e food has been removed from the microwave, you should make sure that the door is closed. Quick start o If you want to cook on the highest power level setting for a period of time, then you can use the Quick Start/Start button (C).
Cancelling a cooking cycle o If you wish to cancel a cooking cycle when it is in progress, you should press the Cancel/Stop button (E). o The m icrowave will stop heating immediately, give an audible signal and the LED display (A) will return to showing the time of day.
Defrost by weight o Press the defrost by weight button (K) and the LED display (A) will show “dEF1”. o Turn the adjustment dial (G) t o select the weight of the food that you want to defrost. The letter “g” will appear on the LED display (A) to indicate grams.
Setting a cooking time in advance o This function will allow you to set a time in the future that the microwave will switch on at. o IMPORTANT: You must make sure that the clock is set to the correct time before using this feature. o Press the microwave button (D) and then use the adjustment dial (G) to set the power level that you require.
Auto menu function o Your microwave has menus pre-programmed into it, where it will cook particular types of food on pre-set power levels and for pre- set periods of time. o Press the auto menu button (I) to access the auto menu function, the LED display (A) will show “A-1”.
Safety lock o When the microwave is not heating, it is possible to switch on the safety lock. o Press and hold down the Cancel/Stop button (E) for 3 seconds. o The microwave will emit a long audible signal and the LED display (A) will display a padlock symbol.
o You should not use ceramic or porcelain crockery, or porous earthenware inside of your microwave. Thes e dishes could absorb moisture from the food whilst it is cooking, which could cause pressure to build up and shatter the dish. o If you are heating certain foods and any liquid, moisture will evaporate and condensation may occur.
Plastic Microwave-safe only. Follow manufacturer’s instructions. It should be labelled as “microwave safe”. Some plastic containers soften as the food inside gets hot. “Boil ing bags” and tightly closed plastic bags should be slit, pierced or vented, as described by the package.
Any damage that is caused to the appliance by a cleaning product will not be fixed by Baumatic free of charge, even if the appliance is within the guarantee period.
Install tion The installation must be carried out by a suitably qualified person, in accordance with the current version of the following. o UK Regulations and Safety Standards or their European Norm Replacements. o Building Regulations (issued by the Department of the Environment).
Page 26
The wiring in the mains lead is colo ured as follows: Brown Live Blue Neutral Green and yellow Earth o As the colours of the wires in the appliance’s mains lead may not correspond with the coloured markings identifying the terminals in your spur box, please proceed as follows: he brown wire must be connected to the terminal marked “L”...
pertur e and ventilation requirements o The diagram above shows aperture ventilation requirements that you require to build the appliance into a housing unit. o Ensure that the rear panel of the furniture housing unit has been removed. o This oven may be installed without any additional ventilation cut outs being made in the housing unit.
Built under installation requirements MPORTANT: NO OTHER METHODS OF BUILDING UNDER THE MICROWAVE ARE SANCTIONED BY BAUMATIC. The rear wall of the housing unit MUST be removed to allow there to be the correct amount of ventilation. o The ventilation gaps below the support shelf and below the worktop MUST be adhered to.
o WARNING: Children should not be allowed near to the appliance unsupervised. Supplied installation components nstallin g the oven into a housing unit o Fit adjustment screw A into the adjustment screw-hole on the top of the microwave. Adjustment screw A should not be fully tightened at this stage.
Page 30
o Place the microwave into the housing unit. o IMPORTANT: Do not push the microwave fully into the housing unit, as you still need to be able to access adjustment screw A at this stage of the installation. o Turn adjustment screw A, ensuring that there is a 1 mm gap between adjustment screw A and the underneath of the top surface of the housing unit.
o Use the frame kit plastic cover and place it over screw-hole B. Troubleshooting o The microwave will not switch on. * Check that the appliance has been connected to the mains supply correctly. * Check that the fuse in the moulded plug has not blown. * Check that the fuses in your fuse box have not blown.
Page 32
Baumatic Customer Care Department. o The interior light bulb is not working. * Call the Baumatic Customer Care Department. The interior light bulb can only be replaced by a trained service technician. o My food is not cooking properly * Check that the power level and cooking time that you have set, is appropriate for the food that you are cooking.
Page 33
Or any installation other than the one specified by Baumatic Ltd. has been completed. Please refer to the conditions of guarantee that appear on the...
BC005 Stainless Steel Cleaner and Protector (250 ml) o BC007 E-Cloth – General Purpose Cloth o BC008 Microwave Cover To order a Baumatic consumable product please call 0123 5437 244 and quote the product code. You can also order online from eshop.baumatic.co.uk...
Need help?
Do you have a question about the BMM204SS and is the answer not in the manual?
Questions and answers
my microwave will not heat up and still turning inside
@chris bloomer my microwave will not heat up and still turning inside