Multi-Sequence Cooking - Baumatic BMG200SS Instruction Manual

Multi-sequence cooking

To obtain the best cooking result, some recipes require different
cooking functions and times. You can program the microwave to follow
one program after another.
o Use the door release button to open the door of the microwave.
o Check that the turntable shaft, turntable ring assembly and glass
tray are correctly assembled in the cavity.
o Place whatever you are cooking in the centre of the microwave
cavity.
o Press the Stop.Clear button once when the colon flashes on the
LED display.
o Select the first required function by pressing the microwave
power button (6) or the Grill.Combi button (2).
o Use the Time.Weight button (4) and the Auto Cooking button
(6) to set the desired cooking time for the first phase.
o Then select the second required function by pressing the
microwave power button (6) or the Grill.Combi button (2).
o Use the Time.Weight button (4) to set the desired cooking time
for the second phase.
o A maximum of 4 phases can be set by following the above
instructions.
o Close the microwave oven door and press the Instant Start
button to begin cooking. The LED display will count down to
show the remaining cooking time. When the first phase has
finished, the second phase will begin automatically.
o If you wish to remove the food before the preset time, you must
press the Stop.Clear button once to clear the preset program to
avoid unintended operation during next use.
o At the end of the cooking time, the LED display will show "End"
and 3 beeps will sound to prompt you to remove the food from
the microwave. If you do not press the Stop.Clear button once or
open the door, the beep will sound every 3 minutes.
o IMPORTANT: The inside of the microwave and the food that
you have been cooking may be extremely hot. So care should be
25