Installing The Microwave Into A Housing Unit - Baumatic BMG200SS Instruction Manual

o When the connection is completed, no stray strands or cut wire
should be present. The cord clamp must be secured over the
outer sheath.
o Broken or damaged power leads must only be replaced by a
suitably qualified person. A power lead of a similar type must be
used in replacement.
Before beginning to install your appliance, check that
there is no sign of damage (on the inside or the
outside of the microwave), and that there are no
packing materials or accessories inside the cavity.
Remove any protective film on the microwave.

Installing the microwave into a housing unit

o Secure the top air guide onto the top of the appliance with self-
lock screws as shown in the diagram above.
32