Table of Contents
Advertisement
o Turn the cooking function selection dial (1) once clockwise to select
oven/heating cooking mode
o Use the adjustment dial (8) to select the bottom–heat & fan function.
The default temperature set is 180°C.
IMPORTANT: You must select the cooking function within 10
seconds or the displayed default setting will be programmed.
o Press the temperature setting button (5) to change the temperature.
Turn the adjustment dial (8) to select the required temperature from
100 - 230°C increasing in 5°C intervals. The maximum temperature
is 230°C and the minimum temperature is 100°C.
o Press the timer button (6) to change the cooking time. The default
time set is 10 minutes. Turn the adjustment dial (8) to set the
required cooking time. The maximum time is 5 hours.
o Press the start / stop button (7) and the oven will begin to cook.
IMPORTANT: The inside of the oven and the food that you
have been cooking may be extremely hot, so care should be
taken when removing items from the cavity. We would
recommend that you use an oven glove.
o After the food has been removed from the cavity, you should make
sure that the door is closed.
Preheating function
Some of the conventional oven cooking functions will require a
preheating cycle beforehand to ensure the oven is properly heated
before food is introduced into the cavity.
o After selecting the required oven function and temperature as
outlined in the "Oven Cooking" instructions on the previous pages,
press the preheating function button (3).
o Press the start / stop button (7) to begin the preheating part of the
cooking process.
NOTE: The oven timer will not start the countdown as this is only
the preheating function. However there will be a temperature
bar at the top of the LED display which will show the pre-heat
progress.
IMPORTANT: If the door is opened during this process, the
preheating function will be cancelled.
19
Advertisement
Table of Contents
