HP Mini 5101 Maintenance And Service Manual page 45

1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device
on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the device.
3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the device.
4. Remove the battery (see
5. If your device has WWAN capability, remove the SIM (see
Remove the keyboard:
1. Remove the 3 Phillips PM2.0×3.0 screws that secure the keyboard to the device.
2. Open the display 90 degrees.
3. Use a tool to push the screw tabs directly down to release the keyboard.
4. Turn the device right-side up, and then lift up on the top and left edges (1) of the keyboard until the
keyboard releases completely.
Battery on page 32).
SIM on page 33).
Component replacement procedures 37