Automatically Cutting The Thread - Baby Lock Ellure PLUS BLR3 Instruction And Reference Manual

²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²
SEWING BASICS
Automatically cutting the
thread
The sewing machine can be set to automatically cut
the threads at the end of the stitching. This is called
"programmed thread-cutting". If programmed thread-
cutting is set, automatic reverse/reinforcement
stitching is also set.
Turn on the sewing machine.
X
The LCD comes on.
Select a stitch.
• For details on selecting a stitch, refer to
"Selecting stitching" (page 49).
Press on the screen.
X
You get
set for programmed thread-cutting and
automatic reverse/reinforcement stitching.
• To turn programmed thread cutting off, press
.
60
, and the sewing machine is
Set the fabric in place, and press
("Start/Stop" button) once.
1
a "Start/Stop" button
X
Stitching starts after reverse stitching or
reinforcement stitching.
Once you have reached the end of the
stitching, press ("Reverse/Reinforcement
Stitch" button) once.
If stitching, such as buttonholes and bar
tacking, that includes reinforcement stitching
has been selected, this operation is
unnecessary.
X
After the reverse stitching or reinforcement
stitching has been done, the sewing machine
stops, and the thread is cut.
/
The thread is cut here.
Memo
z Reverse/reinforcement stitches WILL NOT
be sewn and the thread will not
automatically be cut until
Reinforcement Stitch" button) is pressed.
/ ("Start/Stop" button) may be pressed
to stop stitching when needed such as for
pivoting corners.
z If the power is turned off, programmed
thread-cutting will be turned off.
/
("Reverse/