Eyelet Stitching - Baby Lock Ellure PLUS BLR3 Instruction And Reference Manual

²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²

Eyelet Stitching

Eyelets, such as those on belts, can be sewn. Three sizes of eyelets are possible: 7 mm, 6 mm and 5 mm
(1/4, 15/64 and 3/16 inch).
Stitch Name Pattern
Eyelet stitch
Attach monogramming foot "N".
• For details, refer to "Replacing the presser
foot" (page 42).
Select stitch
• For details, refer to "Selecting stitching" (page
49).
Adjust either the stitch width or the stitch
length to select the desired eyelet size.
a 7mm
b 6mm
c 5mm
• For details, refer to "Adjusting the stitch
width" (page 56) and "Adjusting the stitch
length" (page 57).
Application
62
Sewing eyelets, for example, on
belts
62
.
1
2 3
Stitch Width Stitch Length
[mm (inch)]
Auto Manual Auto
7.0, 6.0 or
7.0 5.0 7.0
(1/4) (1/4, 15/64 (1/4)
or 3/16)
Lower the needle into the fabric at the
beginning of the stitching, and then lower the
presser foot lever.
Start sewing.
X
Once sewing is completed, the machine
automatically sews reinforcement stitches,
then stops.
Use the eyelet punch to cut a hole in the
center of the eyelet.
• When using the eyelet punch, place thick
paper or some other protective sheet under
the fabric before punching the hole in the
fabric.
Memo
z If light weight thread is used, the stitching
may be sparse. If this occurs, sew the eyelet
twice before removing the fabric, one on top
of the other.
Presser
[mm (inch)]
Foot
Manual
7.0, 6.0 or
5.0
N
(1/4, 15/64
or 3/16)
Eyelet Stitching 115
3