Main Tab - Aztech WL635USB User Manual

5.1 Main Tab

Open up the Configuration Utility
WL635USB Wireless B/G USB 2.0
Item
Configure External Configuration Checkbox
using Windows enables you to disable the WLAN Station
Zero Config. indicates that the station driver is to be configured with Windows XP's
built-in
On Windows XP systems, the WZC service is automatically stopped when
the WLAN Configuration Utility
you check the
checkbox.
The checkbox is only displayed on Windows XP systems.
To disable the WZC and access using the
click on the
Profile name The profile name that is currently connected.
SSID The
network.
The name must be identical for all devices and points attempting to
connect to the same network.
Indicates that the network does not require special security settings
and access rights in order to connect to it (that is, you can connect to the
network by setting the station's privacy mode to None and authentication
mode to None).
Indicates that the network requires special security settings and access
rights in order to connect to it.
Indicates a hidden network that is not broadcasting its SSID. The SSID
for such networks are listed as <Hidden Network>. In order to connect to
such a network, you must know the network's SSID.
BBS ID The
Current Tx It displays the currently connected rate.
Rate
Channel The channel that is currently connected.
BSS type The type of connection, either
U s e r M
U s e r M
and the below screen will display the current status of the
Adaptor.
Windows Zero Configuration Utility
Configure using Windows Zero Configuration
WLAN Utility and then uncheck the
SSID is the unique name shared among all points in your wireless
MAC address for the Access Point or station.
P a g e 1
P a g e 1
a n u a l
a n u a l
Description
(Windows XP only): A checkbox that
Configuration Utility
(WZC).
is installed. The WZC is started when
Configuration
Configure using
Access Point or Peer-to-Peer.
4 o f 2 2
4 o f 2 2
and
Utility, right-
WZC.