Dressing A Stone - Axminster AWBGDL User Manual

!
If the grindstones wear unevenly, producing crests, dips or rounded edges, they
should be dressed out using a suitable wheel dressing tool. (A selection of stone dressing
tools are available in the Axminster catalogue.)
Switch the grinder on and allow it to run for at least one minute. Rest the dressing tool on
the tool rest and advance it to the stone until it touches the maximum diameter; gently move
the dresser back and forth across the face of the stone until all irregularities have been
removed and the edges of the stone are nice and sharp.
!
PLEASE NOTE
This is not a procedure that can be rushed, it must be carried out slowly
and steadily.
FREEPHONE

Dressing a Stone...

Dressing the wheel
using a Wheel Dressing
Stick or Devil stone
Part No. DEVILS
0800 371822
W
A X M I N S T E R
W H I T E
15