Specification - Axminster AW8SRG2 User Manual

Carry out a final check e.g. start the machine, check it runs smoothly. On each side, check
that the spark guard is adjusted down to the stone, check the gap between the tool rest and
the stone is correct, check the stone is not badly deformed (rounded edges, grooved face,
etc; unless you have specifically shaped the stone to these profiles)check the eye shield is
correctly positioned. Have a cooling pot to hand if you need it, and remember safety
goggles are a good investment (you are only issued with 1 pair of eyes).
Axminster No.
Motor
Wheel Size
Speed
Lamp (Twist Switch)
Grinding Dust Extraction Port
Footprint (Fully Assembled)
Hold Down Slot (13mm) Fixing Centres
Weight
FREEPHONE
Setting up the Grinder...

Specification...

200mm dia, 32mm wide 32 bore
Edison Screw Max 40W
300mm High, 520mm Wide, 300mm Deep
0800 371822
AW8SRG2
250V 50Hz 900W
1425rpm
40mm O/D
246mm
28Kgs
W
A X M I N S T E R
W H I T E
09