Deactivating Without A Transmitter; Valet Mode; Ignition Control Door Locks; Trunk Release - Autopage C3-RS-603 Operation Manual

LED DISPLAY:
LED Function
Off Unlock
Slow
Locked
Flash
On (Solid)

Valet Mode

CHIRP INDICATOR:
Chirp Function
1 chirp
Lock
2 chirps
Unlock
PARKING LIGHTS:
Parking light
1 flash
2 flashes
Constant On
Under Remote Start

DEACTIVATING WITHOUT A TRANSMITTER

The Override function may be used if the remote transmitter is lost or
inoperative.
1. Enter the vehicle and turn the ignition switch to 'ON' position.
2. Within 10 seconds push and release the valet switch
VALET MODE:
The valet switch allows you to temporarily bypass all system function,
eliminating the need to hand your transmitter to parking attendants or
garage mechanics. When the system is in valet mode, and remote start
functions are bypassed, Enter Valet Mode:
1. From the Unlock condition, turn the ignition to "ON" position.
2. Push and hold valet switch for 2 seconds until the LED turns on.
The LED will remain on as long as the system is in 'valet mode'.
Exit Valet Mode:
1. Return to normal operation, turn ignition 'on'.
2. Push and hold valet switch for 2 seconds, The LED will turn off
indicating the system has exited the valet mode.

IGNITION CONTROL DOOR LOCKS.

If the vehicle's door locks have been interfaced to the security system,
the system will automatically lock the vehicle's doors when the ignition
is turned "ON" and /or unlock the vehicle's doors when the ignition is
turned "OFF".
TRUNK RELEASE (Additional Installation Required)
Press and hold the
Function
Lock
Unlock
button on transmitter for two seconds to remote
4