Troubleshooting Guide; Specifications - Audio Note CDT ZERO Transport Owner's Information

Refer to the relevant sections in the manual for remedy suggestions.
SYMPTOM
No sound from the CD player.
The disc tray does not close.
Playback does not start.
"NO DISC" appears.
Playback does not start from the first track.
AUDIO CHARACTERISTICS
Frequency response:
Signal-to-noise ratio:
Wow and flutter:
Channel separation:
Output voltage
DIGITAL SIGNAL PROCESSING
Optical pick-up:
Semi-conductor laser
D/A conversion:
Sampling frequency:
Power source:
Fuse:
Dimension (with panel):
Weight:
Power consumption:

TROUBLESHOOTING GUIDE

CD is not selected on the amplifier.
The disc is not loaded or seated properly into the
disc tray.
The disc is dirty.
The disc is upside down.
The player is in the PAUSE mode.
Moisture condensation has caused the unit to
operate incorrectly.
There is no disc loaded or the disc is loaded
incorrectly.
The player is in the PROGRAM or RANDOM
mode. Press the STOP (n) button to cancel the
programme.

SPECIFICATIONS

10 Hz - 20 kHz (+0.5 dB)
More than 85 dB
Below measurable limit
More than 80 dB
2 V RMS
3-beam laser
780 nm
44.1 kHz
AC 220-230V 50/60 Hz
230V – 500 mA Anti-surge
120V – 500 mA Anti-surge
220 (W) x 120 (H) x 300 (D) mm
4kg
8W
-7-
- - 8
CHECK POINT