Troubleshooting Guide; Specifications - Audio Note CD 4.1x Owner's Information

TROUBLESHOOTING GUIDE

Refer to the relevant sections in the manual for remedy suggestions.
SYMPTOM
No sound from the CD player.
Playback does not start.
"NO DISC" appears.
Playback does not start from the first
track.
IMPORTANT INFORMATION
Compact disc player have built-in error compensation circuits to correct minor
manufacturing defects on a disc. In some cases, defects on the disc, which are too large
for the error compensation circuits to handle, may cause the CD player to skip some
tracks during playback. If this problem occurs, play a new disc, normal playback of the
new disc indicates that the previous disc is damaged in some way. However, if the
problem continues, it is best to have the unit serviced.

SPECIFICATIONS

Optical pick-up:
Semi-conductor laser:
Power source:
Output impedance
Reference output
Channel balance
Fuse:
Dimensions:
(incl. connectors)
Weight:
Power consumption:
CHECK POINT
CD is not selected on the amplifier.
The disc cover is not fully closed.
The disc is dirty.
The disc is upside down.
The player is in the PAUSE mode.
Moisture condensation has caused the unit to
operate incorrectly.
There is no disc loaded or the disc is loaded
incorrectly.
The disc clamp is not in place.
The disc is dirty.
The disc is upside down.
The player is in the PROGRAM or RANDOM
mode.
Press the STOP (
program mode or RANDOM button to cancel
random mode.
3 beam laser
780 nm
AC 100-120V/220-240V 50/60 Hz
Less that 2 kohm
3.0V RMS (approx.)
Less that 0.25dB
220/240V 1 x 100 mA Slow blow (T type)
2 x 250mA Slow blow (T type)
1 x 500mA Slow blow (T type)
100/120V 1 x 200 mA Slow blow (T type)
2 x 500mA Slow blow (T type)
1 x 1A Slow blow (T type)
446 (W) x 142 (H) x 428 (D) mm
11kg
48W
■
) button to cancel the
7