Troubleshooting Guide; Specifications - Audio Note CD 3.1x/II Owner's Information

TROUBLESHOOTING GUIDE

Refer to the relevant sections in the manual for remedy suggestions.
SYMPTOM
No sound from the CD player.
Playback does not start.
"NO DISC" appears.
Playback does not start from the first
track.
IMPORTANT INFORMATION
Compact disc player have built-in error compensation circuits to correct minor
manufacturing defects on a disc. In some cases, defects on the disc, which are too large
for the error compensation circuits to handle, may cause the CD player to skip some
tracks during playback. If this problem occurs, play a new disc, normal playback of the
new disc indicates that the previous disc is damaged in some way. However, if the
problem continues, it is best to have the unit serviced.

SPECIFICATIONS

Optical pick-up:
Semi-conductor laser:
Power source:
Output impedance:
Reference output:
Channel balance:
Tube compliment:
Fuse:
Dimensions:
(incl. connectors)
Weight:
Max power consumption: 48W
CHECK POINT
CD input is not selected on the amplifier.
The disc is dirty.
The disc is upside down.
The player is in the PAUSE mode.
Moisture condensation has caused the unit to
operate incorrectly.
There is no disc loaded or the disc is loaded
incorrectly.
The disc is dirty.
The disc is upside down.
The player is in the PROGRAM or RANDOM
mode.
Press the STOP (
program mode or RANDOM button to cancel
random mode.
3 beam laser
780 nm
AC 100-120V/220-240V 50/60 Hz
Less that 2 kohm
3.0V RMS (approx.)
Less that 0.5dB
2 x ECC88
220/240V 1 x 250 mA Slow blow (T type)
1 x 500 mA Slow blow (T type)
100/120V 1 x 500 mA Slow blow (T type)
1 x 1 A slow blow (T type)
446 (W) x 145 (H) x 420 (D) mm
8 kg
■
) button to cancel the
7